How to improve the mounting efficiency of SMT placement machines is a concern for many SMT placement machines.
The placement machine is a device for realizing high-speed, high-precision, fully automatic placement of components, and is the most critical and most complex device in the entire SMT production. The device can be stably, quickly, completely, and correctly sucked without any damage to the device and the base board, and the device can be quickly and accurately mounted at a specified position. At present, many small and medium-sized enterprises in China are affected by factors such as economy and production scale, and there is a large demand for desktop, economical, and high-precision placement machines.
In the current placement machine products, especially the desktop placement machine, many of them lack the vision system and adopt the open loop control mechanical system, which is difficult to ensure a stable high placement accuracy. The core part of the placement machine is:
1, high-speed high-precision motion control technology.
2, visual technology.
3, software technology.
To achieve high-precision placement, the placement machine must have a precise placement mechanism as the basis. The motion control system is the core part of the placement machine, and the precision control has a great influence on the whole machine.
To improve the production efficiency of the SMT placement machine, the most direct and effective way is to optimize the core part of the SMT placement equipment—the motion control system.
To this end, Qizhong Intelligent has developed a set of visual dispensing systems that integrate vision, dispensing, and placement into an SMT placement machine, directly addressing the core issue of the placement machine, that is, using a PC+ motion control card. + Visual system + software approach, assisting enterprise SMT placement machines for optimal upgrades.
working principle:
A manipulator equipped with a suction nozzle, with the aid of a vision system, picks up the disordered chips on the feeding table one by one, accurately places them on the jig, and aligns them. High-precision robots with visual positioning system, high-precision paste.
In addition to this motion control system, there are some other reasons that affect the placement productivity of SMT placement machines:
1, the suction nozzle wear.
2, the drive part of the wearer or deformation of the feeder.
3, patch machine detection system failure.
4, SMT placement machine device tape bad.
In addition, periodic inspection and maintenance of the SMT placement machine is also one of the powerful guarantees to ensure that it fully realizes its efficacy. Therefore, we must always carry out scientific inspection and maintenance of the equipment on a regular basis so that the equipment is in good condition.
Compute Stick Intel,Mini All In One Pc,Desktop Computer Mini Fan,Mini Pc Box Desktop
C&Q Technology (Guangzhou) Co.,Ltd. , https://www.gzcqteq.com