Features:
1. Outputs almost 6750 Lumens full on, narrow beam suitable for stage, studio room, architeture.
2. Field angle (10% intensity) 43 degree standard, mix good color.
3. Patent new lamp body, Amitaion of pumkin design, apears nature and sincere.
4. Whole lamp body fully used as heat sink, support heatsink 120W at 35º C rise, built-in protection lower output intensity from full to 70%-80%.
5. Touch LED display, no easy broken buttons, 2minutes no operation no display
6. LED Display board shows DMX signal, offer Dimming curve squarelaw Dim4
7. With waterproof air valve to balance pressure, get rid of mosuisture on glass innerface.
Specification:
| Power Input | AC 100-240VAC, 47-63 Hz |
| Output | 24V DC, power factor>0.7 |
| Rated Power | 150W, typical consumption 138W@220V |
| Light Source | 10W 4-in-1 FULL RGBW 18 pcs LED. Drive current for each chip: 0.7A |
| Light Output | 5760 lumens, luminaire efficiency 49l m/W |
| Peak Intensity | 38630 Cd (43Degree Field Angle) |
| LED Color | R=625nm, G=525nm, B=465nm, A=590nm, White=6000K |
| Color Rendering Index | Ra>90, R9>50 |
| Color Mixing Index | Standard deviation of chromaticity SDC<0.005 |
| Control Signal | Meet E1.11 - 2004 USITT DMX512-A regulation, 32 bit precise dimming, smooth in low DMX value dimming, no vision shock |
| Channels | 3CH, 4CH, 5CH, 8CH, 9CH |
| Display | Touch operations, LED display show DMX single status and automatically turn off when no operation |
| Dimming | with from Dim0 to Dim4, 5 dimming curves, include smooth dimming |
| PWM Frequency | >600Hz, flash rate full load>12Hz full load/void load flash |
| Beam Angles | 25°, 62° |
| Housing Material | Die cast aluminum |
| IP code | IP65 |
| Cooling Method | Natural cooling, thermal protection, NTC overheat protection |
| Connectors and Cables | IP67 Male/Female for fixed applications, IP65 Blue/Yellow connectors without cables for rental |
| Soldering Technology | 180ºC reflow soldering, 15000 hours longevity for SMPS and main board |
| Housing Color | Standard matte black, pumpkin color also available |
| Accessories | Barn door, hook, safety cable, signal extension cable, power extension cable |
| Size | 270*166*284 mm |
| Weight | 5.2 Kg, with two yokes |
| Operating temperature | -20ºC - +55ºC |
| Certificate | CE, RoHS |
Exhibitions:
Shipping:
Our products can be shipped by Sea, by Air, or by Express.which methods to be used is based on
the weight and size of the package, and with consideration of customer's requirements.
by sea: 20-40days;
by air: 5-10days ;
by express: 3-6days
Why choose us:
1. Price: we are factory, able to offer better price .
2. Good quality: we are experienced in quality control; Through CE, RoHs,UL certification.
3. On time delivery: delivery the goods on time;
4. Professional seller: good communication in patient and well know our products;
5. MOQ: depent on different lights.
6. ODM&OEM :good ODM&OEM and custom engineering services.
FAQ:
| 1. Are you a factory or trading company? Yes , We are a factory. |
| 2. Where is your factory located? How can I visit there? Our factory address is : No.2 XiaheRoad, Baiyun Industrial Area , Jianggao Town, Baiyu District, Guangzhou, China ,about 30 minutes away from Bai yun Airport by metro. All our clients, no matter where you are from, all are most welcome to visit us ! |
|
3. Which products we have? We produce different kinds of LED Light . Our product: A. LED Moving Spot and Wash; B. Studio Light; C. Indoor Parcan; D. Professional Wash; E. Audience and DJ; F. Outdoor Parcan; G. Outdoor Washer; H. Black Light; J. Control System; K. Dramatic architectural and landscape lighting. |
| 4. How to get the latest price? If you want the latest price, Please Email or call us with the items names or NO. What are you interested in ,together with your details(name,details address,telephone,etc),we will send to you as soon as possible. |
| 5. Does the products have any certificate? Yes, our products have CE,ROHS ,UL and SGS certificate . |
| 6. What's the Payment method? All methods can be discussed. |
| 7. How to Place an order? Please kindly send us you order by email ,we will confirm the PI with you .we wish to know the below:Delivery information,company name, address details,phone/fax number,destination,transportation way ;Product information:item number,size,quantity,logo,etc. |
narrow beam led spot light outdoor from China professional narrow beam led spot light outdoor manufacturer.
If you have specific parameters and requirements for our narrow beam led spot light outdoor, customization is available. high power CE 18*10W DMX512Â outdoor narrow beam led spot light
Features:
1. Outputs almost 6750 Lumens full on, narrow beam suitable for stage, studio room, architeture.
2. Field angle (10% intensity) 43 degree standard, mix good color.
3. Patent new lamp body, Amitaion of pumkin design, apears nature and sincere.
4. Whole lamp body fully used as heat sink, support heatsink 120W at 35º C rise, built-in protection lower output intensity from full to 70%-80%.
5. Touch LED display, no easy broken buttons, 2minutes no operation no display
6. LED Display board shows DMX signal, offer Dimming curve squarelaw Dim4
7. With waterproof air valve to balance pressure, get rid of mosuisture on glass innerface.
Specification:
| Power Input | AC 100-240VAC, 47-63 Hz |
| Output | 24V DC, power factor>0.7 |
| Rated Power | 150W, typical consumption 138W@220V |
| Light Source | 10W 4-in-1 FULL RGBW 18 pcs LED. Drive current for each chip: 0.7A |
| Light Output | 5760 lumens, luminaire efficiency 49l m/W |
| Peak Intensity | 38630 Cd (43Degree Field Angle) |
| LED Color | R=625nm, G=525nm, B=465nm, A=590nm, White=6000K |
| Color Rendering Index | Ra>90, R9>50 |
| Color Mixing Index | Standard deviation of chromaticity SDC<0.005 |
| Control Signal | Meet E1.11 - 2004 USITT DMX512-A regulation, 32 bit precise dimming, smooth in low DMX value dimming, no vision shock |
| Channels | 3CH, 4CH, 5CH, 8CH, 9CH |
| Display | Touch operations, LED display show DMX single status and automatically turn off when no operation |
| Dimming | with from Dim0 to Dim4, 5 dimming curves, include smooth dimming |
| PWM Frequency | >600Hz, flash rate full load>12Hz full load/void load flash |
| Beam Angles | 25°, 62° |
| Housing Material | Die cast aluminum |
| IP code | IP65 |
| Cooling Method | Natural cooling, thermal protection, NTC overheat protection |
| Connectors and Cables | IP67 Male/Female for fixed applications, IP65 Blue/Yellow connectors without cables for rental |
| Soldering Technology | 180ºC reflow soldering, 15000 hours longevity for SMPS and main board |
| Housing Color | Standard matte black, pumpkin color also available |
| Accessories | Barn door, hook, safety cable, signal extension cable, power extension cable |
| Size | 270*166*284 mm |
| Weight | 5.2 Kg, with two yokes |
| Operating temperature | -20ºC - +55ºC |
| Certificate | CE, RoHS |
Exhibitions:
Shipping:
Our products can be shipped by Sea, by Air, or by Express.which methods to be used is based on
the weight and size of the package, and with consideration of customer's requirements.
by sea: 20-40days;
by air: 5-10days ;
by express: 3-6days
Why choose us:
1. Price: we are factory, able to offer better price .
2. Good quality: we are experienced in quality control; Through CE, RoHs,UL certification.
3. On time delivery: delivery the goods on time;
4. Professional seller: good communication in patient and well know our products;
5. MOQ: depent on different lights.
6. ODM&OEM :good ODM&OEM and custom engineering services.
FAQ:
| 1. Are you a factory or trading company? Yes , We are a factory. |
| 2. Where is your factory located? How can I visit there? Our factory address is : No.2 XiaheRoad, Baiyun Industrial Area , Jianggao Town, Baiyu District, Guangzhou, China ,about 30 minutes away from Bai yun Airport by metro. All our clients, no matter where you are from, all are most welcome to visit us ! |
|
3. Which products we have? We produce different kinds of LED Light . Our product: A. LED Moving Spot and Wash; B. Studio Light; C. Indoor Parcan; D. Professional Wash; E. Audience and DJ; F. Outdoor Parcan; G. Outdoor Washer; H. Black Light; J. Control System; K. Dramatic architectural and landscape lighting. |
| 4. How to get the latest price? If you want the latest price, Please Email or call us with the items names or NO. What are you interested in ,together with your details(name,details address,telephone,etc),we will send to you as soon as possible. |
| 5. Does the products have any certificate? Yes, our products have CE,ROHS ,UL and SGS certificate . |
| 6. What's the Payment method? All methods can be discussed. |
| 7. How to Place an order? Please kindly send us you order by email ,we will confirm the PI with you .we wish to know the below:Delivery information,company name, address details,phone/fax number,destination,transportation way ;Product information:item number,size,quantity,logo,etc. |
narrow beam led spot light outdoor from China professional narrow beam led spot light outdoor manufacturer.
If you have specific parameters and requirements for our narrow beam led spot light outdoor, customization is available.
Progressive Punching is an efficient self-riveting process of fixed rotor, which can realize large-scale and precise riveting operation and is suitable for mass manufacturing production line. The following is the introduction of progressive rotor self-riveting process:
First, determine the type and specification of the stator and rotor required for riveting, and prepare the rivets and riveting machines required for riveting. Rivet size should match the hole size of stator and rotor to ensure tight fit and firmness.
According to the size and riveting requirements of stator and rotor, the rivet is machined into the corresponding length and shape. Progressive punch riveting machine also needs to adjust, set, calibrate the position of the riveting head, pressure, speed and other parameters.
Insert the rivet into the stator hole, and start the progressive punching riveting machine with electricity. The rivet will exert force on the rivet head according to the set parameters, and form a large number of threaded processes on the inner wall of the stator hole, so that the rivet deformation is firmly connected with the stator.
Wait for the rivet deformation, riveting process is complete. The remaining rivet tail should be cut off and inspected after riveting is completed to ensure that the riveting is firm and reliable and the transmission system runs smoothly.
In general, the process of progressive impact fixed rotor self-riveting can improve the production efficiency, but also ensure the precision and stability of riveting. However, riveting machine adjustment requires specialized skills, so an operator familiar with the riveting process is required.
Motor stator riveting, beraring stator riveting, generator stator riveting
Henan Yongrong Power Co., Ltd , https://www.hnyongrongglobal.com