The film blowing machine is the equipment used for plastic blown film. There are many materials for blown film, such as PE, PE, PVC, etc. It mainly heats and melts these materials and then blows them into a film. The working power is very large, then How can I save power consumption? The transformation of pvc blown film machine manufacturing machinery technology will promote the development of the plastics industry. For a long time, the plastics industry relies on foreign advanced machinery and equipment...
Below, the blown film machine manufacturer introduces how to operate the blown film machine to save electricity:
The film blowing machine is the equipment used for plastic blown film. There are many materials for blown film, such as PE, PE, PVC, etc. It mainly heats and melts these materials and then blows them into a film. The working power is very large, then How can I save power consumption?
The transformation of manufacturing machinery technology will promote the development of the plastics industry. For a long time, the plastics industry relies on foreign advanced machinery and equipment, and the introduction of foreign technology will increase the production cost of the plastics industry and the plastics industry. The development of the intelligent model of the plastic machine not only improves the blown film. The performance of the machine can reduce costs and reduce working time, which will significantly improve the status quo of the plastics industry. Intelligent manufacturing equipment refers to the intelligent system of mechanical equipment, with the ability to perceive, analyze, decide and control the outside world. The application of this intelligent mode enables the film blowing machine to have sensing and temperature-controlled sensing coefficients, which can effectively operate automatically. , improve efficiency, and make the film blowing machine have preventive detection function.The production process of the film blowing machine is to first add the dried polyethylene particles into the lower hopper, and then the particles enter the screw from the hopper by their own weight. When the screw is in contact with the oblique edge of the thread, the rotating slanting face faces the plastic and the slant楞 Face the vertical thrust and move the particles forward. During the pushing process, the plastic is melted due to the friction between the plastic and the screw and the plastic and the barrel, as well as the collision friction between the particles, and also due to the external heating of the barrel. The molten plastic is filtered through the machine head to remove impurities from the mold, and the finished film is rolled into a cylinder by cooling, inflation, and the like.
Electromagnetic heating (IH) technology is a new high-frequency heating technology. After research and development by researchers, it produces energy-saving and environmentally-friendly high-frequency heating systems, and the heating efficiency is increased to 90% (up to 99.8%). According to the installation and testing in various plastic processing enterprises, the energy-saving and environmental protection high-frequency heating system is very obvious for plastic processing enterprises, saving electricity by 30%-70%. Fully reflect its energy-saving advantages, save a large amount of electricity costs for plastic processing enterprises, improve production efficiency, improve the environment of the workshop, thereby directly reducing indirect production costs
Banknote Value Counting Machine Two CIS
Banknote Value Counting Machine,Banknote Value Counting Machine Two CIS,Two CIS
Suzhou Ribao Technology Co. Ltd. , https://www.ribaoeurope.com