| 8M Pole Height 60W LED | 11-12 Hrs 3-4Nights Lighting |
| Solar Panel: Lifespan:20-25years |
140W*2PCs for 24V Lighting,17% Efficiency,Mono Crystalline Silicon.High Efficiency. |
| Gelled Battery Lifespan:5-8years |
150Ah/12V*2PCs,Sealed Type,Gelled.Deep cycle.Maintenance Free |
| Intelligent Solar Controller, PWM Type, Lifespan:5-10years |
15A/24V*1PC,Automatic Light and Time Control Over-charging/discharging Protection Reverse-connection Protection |
| Light source:High Power LEDÂ Lifespan:>80000Hrs |
60W*1PC LED,White color,140LM/W,30Lux,6500K IP65,120DEGREE Angle |
| Pole: Lifespan:More than 20years |
8M Height,Steel,Hot-Dip Galvanized.With Arm,Bracket,Flange,Fittings |
Wind power generator
The weak wind can also power the three-leaf optimal design
The inhibition of fan sound silent operation
high Feng Shui Ping bias type protection function
 |
high power LED light source LED Material Description 1.)Lamp Body: High-Pressure Die-Casting Aluminum. Corrosion Resistant 2.) Application with Polyester Substance in its Surface. 3.) Implement of Reflect: Made of High Purity Aluminum. 4.) Cover: High Strength and High Transparent Toughened Glass 5.)Fastener Bolt and Screws: Stainless Steel 6.)Arm Diameter: 60mm 7.) IP65 Adopt imported high performance chip patent packaging,than the traditional energy-saving lamps 60% pavement evenness achieves 0.7 above,uniform illumination without spot phenomenon high color: reduction of objects it color,beautify the city environment The environmental health:LED no mercury,no UV radiation,is more conducive to environmental protection and human health |
 |
Solar panels energy efficient electric energy converter device The solar panel is composed of a plurality of each unit,using semiconductor P-N pole photoelectric,light energy is converted into electric energy |
 |
Storage battery Uses the high efficiency,maintenance-free batteries,can be in calm,no day lighting conditions to work for 5Â consecutive days |
 |
The microcomputer controller preventing overcharge and over discharge Time control and light control function The strong wind protection function |
Solar energy light brief introduction
1.Using the microcomputer intellective controller to transfer the light energy to electrical energy .Easy to install since no wiring &Â trenching,energy conservation and environmental protection
2.The microcomputer intellective controller is composed by advanced special-purpose integrated circuit,high conversion efficiency,prevent over-load &over-discharge,Output short circuit protection,extend work life, on the safe side,convenient usage.
3.High effective Non-maintaining accumulator cell,strong storage,durable usage.
4.Automatic track type time controller,Automatically adjust the working time along with different illumination time in various seasons.For extending the work time energy conservation intellective controller will automatic shut-off the light at Deep-night.
Features
lighting source:LED
Solar panel:Monocrystalline or polycrystalline,10years life time
Storage battery:high efficiency colloid battery,free maintenance
Service life:5years
Controller:time control and light control,preventing from overcharge and overdischarge,having output short circuit protection.
Ambient temperature:-30~+60
Lighting time :subject to exact configuration power,normal over 8hours.
Height:5m-8m
FAQ
1:How many cycles full charge&discharge about your battery?
 In 50% discharging deepness, it can be cycled for 1,200 times; in floating charging and discharging status, it can be cycled for 5000~6000 times.Â
2.How to Choose the System Voltage  12V or 24V or for normal street Light ?Â
We can design the System for 12v or 24v for solar street Light or 220-380V for normal street light . Â
3.What's the main difference between mono and polycrystalline solar panel?
production process and cost. Polysilicon technology is more mature since it is an early technology compared with Monosilicon.Â
4.The controller of your solar street light has dual time control function?
our solar charge controller is designed with dual time control function, you can set up the lighting time and divide it into two parts, like 12 hours (6 hours full power lighting +Â 6 hours half power lighting)
Welcome to contact us a.s.a.p.
| Contact person:Dongzhou Zhao | M.B.+8618652772323 |
| Â | dongzhou.zhao |
Â
Fiber optic adapter are used in fiber optic connection, the typical use is to provide a cable to cable fiber connection. People sometimes also name them to be mating sleeves and hybrid adaptors, mating sleeves means this fiber optic adapter is used to connect the same type fiber optic connectors, while hybrid adaptors are the fiber optic adaptor types used to connect different kinds of fiber optic connectors. YLTelecom`s fiber adapter provide reliable solution for fiber connections, single mode fiber optic adaptors and multimode fiber optic adaptors available on request. We adopt high quality raw materials and make these fiber optic adapters strictly according to international standard, this makes our fiber optic adaptors with high performance.
Fiber Optic Adapters FC, SC, ST, LC, MT-RJ, MU, E2000, FC/APC, SC/APC, LC/APC, E2000/APC, Simplex, Duplex, Quad, mating sleeves, hybrid fiber optic adapters, Single mode fiber optic adapters, multimode fiber optic adapters are all available.
Fiber optic adapters (also called couplers) are designed to connect two fiber optic cables together. They come in versions to connect single fibers together (simplex), two fibers together (duplex), or sometimes four fibers together (quad).
Adapters are designed for multimode or singlemode cables. The singlemode adapters offer more precise alignment of the tips of the connectors (ferrules). It is ok to use singlemode adapters to connect multimode cables, but you should not use multimode adapters to connect singlemode cables. This can cause misalignment of the small singlemode fibers and loss of signal strength (attenuation).
When connecting two multimode fibers, you should always make sure they are the same core diameter (50/125 or 62.5/125). A mismatch here will cause attenuation in one direction (where the larger fiber is transmitting light into the smaller fiber).
Fiber optic adapters are typically connecting cables with similiar connectors (SC to SC, LC to LC, etc.). Some adapters, called "hybrid", accept different types of connectors (ST to SC, LC to SC, etc.). When the connectors have differing ferrule sizes (1.25mm to 2.5mm), as found in LC to SC adapters, the adapters are significantly more expensive because of a more complicated design/manufacturing process.
Fiber Optic Adapter, Fiber Optic Cable Adapter, SC Fiber Optic Adapter, ST Fiber Optic Adapter, FC Fiber Optic Adapter
NINGBO YULIANG TELECOM MUNICATIONS EQUIPMENT CO.,LTD. , https://www.yltelecom.com