In the decoration process, the modification sometimes even partially reversed the reconstruction. Sometimes the owner always has some new ideas and new ideas, which leads to insufficient hole punching and insufficient line management. Sometimes the installation sequence is unclear (mostly in the clearing mode). B) Here, I will summarize the rework points that are most likely to occur during the installation of three central air conditioners. Remember to remember that you must consider carefully before starting work.
First, the position of the internal machine must be considered in advance. Once the position is determined, the worker master starts to punch holes and lay the pipeline, it is not easy to adjust the pipeline. The owner sometimes wants to adjust the position of the internal machine during the half of the renovation. It is still feasible to re-adjust the line at this time, but the workload will be very large.
Second, before the ceiling is packaged, I want to know if all the water pipes and wires and pipes are complete. In order to take the dark line, some decoration units will use the ceiling to borrow from the room. Once the ceiling is packaged, it is not easy to modify.
A common example: suddenly want to fill a washing machine or sink in the balcony, you need to add a water pipe from the kitchen to the balcony, you can also adjust before the ceiling is not fully packaged.
Third, before the design, sometimes the owner considers that in order to be neat, the ceiling and furniture will be flush, or flush with the door frame. After the completion of the construction, the ceiling is too deep and you want to do it as a whole. At this time, the amount of rework will be great.
Therefore, in the early design, we must be solidly scribbled, and do a comprehensive 3D map. Sometimes the design company will look at the 45-degree view, often ignoring the final effect of the ceiling, and easily causing blind spots in the effect.
The decoration process was originally a complicated and systematic project. If there were any omissions or modifications in the intermediate links, the whole process would be taken. Here, I would like to remind the owners who are preparing to decorate. I would rather like to listen more and think more in the early stage, and don’t rush to take a step to take a step.
3.0mm Wire To Board Connectors
3.0mm Wire To Board Connectors are avialable in different terminations and sizes intended for use on a variety of applications. These connectors provide power and signal with different body styles, termination options, and centerlines. To find the wire to board set required, click on the appropriate sub section below.
3.0mm Wire To Board Connectors Type
3.0mm Terminal
3.0mm Housing
Pitch 3.0mm Wafer Right Angle&SMT Type
3.0mm Wafer Straight Type
3.0mm Wafer SMT Type
3.0mm Wafer Right Angle Type
3.00mm Wafer Single Row Straight Type
3.00mm Wafer Single Row SMT Type
3.00mm Wafer Double Row Straight Type
3.00mm Wafer Double Row SMT Type
3.00mm Wafer Double Right Angle Type
3.00mm Wafer Double Right Angle&SMT Type
3.0mm Wire To Board Connectors Advantages
Small electronics with high current requirements
One of the strongest advantage of the Micro Fit series is its applicability in delivering the high current requirement in electronics with supplying high power.
Safe and Reliable
ensure safety, system protection and performance with its bonded metallic conduits and multiple grounding points preventing fire hazards, component damage, overheating and possible electrocution.
ROHS Compliant
The product does not contain restricted chemicals in concentrations not complying with ROHS standards. Thus, for its components, the products can be worked upon at high temperatures required by lead-free soldering.
3.0mm Wire To Board Connectors Application
Motherboard Connectors
The Motherboard of a computer holds together many of the crucial components such as the central processing unit (CPU), memory and connectors for input and output devices. Microfit connectors ensure high performance electronic system in quality motherboards.
You can easily find Scondar`s Microfit in most ITX Motherboards, in which its functionality is best described for solid performance in a small footprint, and low power consumption (less than 100 Watts).
Printer Connectors
The 3.0mm Microfit can also be seen in most printers
Automotive PC Connectors
Smart, high power automotive PC power supply garners its capabilities from quality Microfit connectors, designed for general purpose battery powered applications. These are manufactured to provide power and to control the motherboards' switch based on ignition status.
Solar Panels
Microfit can also be commonly found in a solar array. A solar array is connected to each other, and to inverters through connectors to produce a successful flow of electricity.
Pcb Connectors Wire To Board,3.0Mm Wire To Board Connectors,3.0Mm Pcb Wire To Board Connector,3.0Mm Pin Wire To Board Connector
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkcon.com