Common smart home system installation problems and solutions

With the continuous development of the smart home industry, more and more smart home products and smart home systems are being implemented. More and more consumers are also happy to introduce smart products into their homes to make life easier and more fun. , But many consumers will have such problems when installing smart home systems. Then the following editors have collected some problems and solutions in the installation of smart home systems, hoping to be useful to everyone.

1. If the smart host is connected through the network, is it necessary to leave a lot of network cable interfaces?

A: The host is connected to the router through a wired network, but the host and all terminal devices are all connected through a wireless network. Therefore, you only need to leave a network interface for the smart home control host. You can connect to the router directly.

2. The timing control function of the system is set when the system is installed, or is it set to use when it is used?

A: The timing control function of the smart home system is completely set by the user. Now the setting interface is very simple and user-friendly, usually only need to tick, select the time to complete the setting. Once the timing function is set, it will be automatically executed periodically, in the same way as setting the mobile alarm clock. If you don't understand the use, you can ask the manufacturer of the product to demonstrate.

3. What is the cost if a full set of smart home systems and equipment are configured?

A: The specific cost depends on the user's house structure, wiring installation and the number of accessories that are selected. If it is the easiest way to control lights, TVs, air conditioners, and audio equipment, it is basically a host plus an infrared transponder. Several control panel costs.

4. Is it responsible for the installation of smart home system products?

A: It is the manufacturer who is responsible for providing all the installations. The on-site installation engineer can guide the overall use.

5. If there are several air conditioners and televisions at home, how do you know which one you want to control? Is it all open or all closed?

A: The main unit of the smart home system is digital. Each device has a unique address code for identification and control. Even if there are 10 air conditioners in the home, there will be no confusion in the control panel or other control terminals. Will be clearly listed.

6, if the home has been installed curtains, now installed smart electric curtains, is not to change the track?

A: You can install special curtains for electric curtains under the original track or remove the original curtain rods. The track installation of the electric curtains is also very simple, and it can be fixed by the screws on the top. The motor is directly buckled vertically on the track and hidden in the corner.

7, switch panels replaced with wireless smart panels, but also when the ordinary switch to use it?

Answer: It is perfectly fine. And if the replacement wireless smart panel is a touch type, it usually has a luminous function in the evening, which is more convenient and more grade. Not only can it be controlled by the mobile phone and the computer everyday, the manual operation mode is also applicable, and the elderly can also be simple. learn.

8. What position does the smart home host need to be installed in the home?

A: The host can be installed anywhere, as long as there is a network cable.

9, if it is a villa or more than one floor of the use of the house, need to install additional equipment?

A: If the villa floor has 2, 3, or 4 floors, it is generally not necessary to add signal repeaters. Unless there are special circumstances (such as signal dead zones), it is necessary to install signal repeaters.

10, home must use broadband network to install smart home system?

A: If you have a broadband network in your home, you can control your home's electrical equipment anywhere because the host can connect to the Internet. If you do not have broadband at home, you can only control electrical equipment at home.