Disdain Raspberry Pi: JaguarBoard is an affordable x86 microcontroller

Single chip microcomputer STM32L151CCU6

1206RGB (single)

0201 package SLP0603 ESD electrostatic diode 5V one-way ESD

Mobile phone crystal 3.2*2.5mm 3225 26M (26.000MHZ) 7.5PF 10PPM 20PPM 30PPM

The outer diameter of the probe domestic PA50-F small four-jaw gold-plated needle is 0.68. The total length of the needle is 16

As an ARM hardware development platform, the Raspberry Pi has sparked a lot of fanaticism. But if you want more energy, especially x86, the JaguarBoard, which is currently being crowdfunded on Kickstarter, is clearly a good choice. It is reported that the MCU is equipped with Intel quad-core Atom Z3735G processor (clocked at 1.33-1.83GHz), 1GB RAM + 16GB eMMC ROM, and the size is 101.9 x 64.5 x 1.6 mm.

JaguarBoard provides 1 HDMI 1.4 video output, 1 10/100M LAN, 3 USB 2.0, 1 3.5mm audio, 2 COM ports, 1 SDIO, 4 GPIOs, and an I2C port.

Because it is based on the x86 platform, users can experience different operating systems, including Linux and Windows.

Although its fundraising target was only $3,000, more than 400 supporters quickly raised the total amount to more than $20,000.

Interested users can come up with $45-50 to support, in addition to the board, you can also get a USB Hub and 16GB TF card. If all goes well, the project is expected to start shipping this month.