Features:
Bluetooth (It is said that the remote controller can shoot 30,000 photos)
1/4 screw
tripod
Back convex mirror
Anodizing feels good
PTZ
Vertical shooting
Disadvantages:
Tripod support is too loose and confidence is not enough. However, it is still stable.
Reasons to purchase(You can say your own buying needs, comparison experience, and final choice reasons)
A few days ago, after seeing Aunt Zhang recommending the "Millet Bluetooth Selfie Stand", I felt as if I had discovered the New World! After leaving the trip, you only need to bring a selfie stick! See the card for details.
domestic
New starter: MI millet stand self-timer lever 89 yuan + 10 yuan shipping integrated self-timer and tripod, Bluetooth free remote control. Millet official website has opened new products to buy, the current 89 yuan +10 yuan to start shipping. Value Friends broke the original: Xiaomi stent self-timer set self-timer, tripod in one, Bluetooth free remote control. 360° rotatable phone holder/stand-alone Bluetooth remote control/aluminum alloy anti-slip rod self-timer, tripod integrated design. Standalone Bluetooth remote control. Available in Android 4.3 or above or iOS5piggy007 | Value 96 Comments 213 Favorites 135 Direct Links View Details However, the value of Friends Comments reminded that this section does not have 1 / 4 screw interface, "What do you want?" (I feel every piece of millet products below the value of Friends Comments are very exciting, spit splash)
Because I'm mainly shooting micro-single and mobile phones out of the room, and I might start Gopro in the future. (SLRs don't have it anymore.) So if you can do both on your mobile phone and on a micro-single, then it's better. So after some searching, this product: ESCASE ZPG-02
ESCASE self timer ZPG-02 multifunctional tripod mirror self-timer artifact self-timer (elegant black) 139 yuan Jingdong direct link This section is equipped with a small pan tilt, 1/4 screw, can take other photographic equipment, scalability is very powerful. His family also has a model that does not come with a pan/tilt, and there are no 1/4 screws. This will only clip the phone. The advantage is that it can be folded over and folded to a smaller size.
ESCASE Selfie Stick ZPG-03 Selfie Stick Selfie Stick Bluetooth Selfie artifact Tripod Self-timer 360 Degree Rotation Foldable Carbon Fiber 129 Yuan Jingdong Direct Link We can refer to the pictures and compare them.
Appearance Gallery
Family portrait. It is worth mentioning that a remote controller 2023 battery is included. Although it is not a valuable thing, it reflects the intentions of the business.
The bluetooth shutter remote controller is assembled with a selfie stick. Here is not the use of millet's magnetic suction, is a simple nest of silicone sleeves. Removing the insertion is relatively smooth and does not become an obstacle. There is only one key on the remote control, which is the control of the shutter, which is the volume up key on ios. The shutter is activated when the button is released. Take time to capture.
Partial work details show. It is worth mentioning that the tripod part is plastic and can be seen through the shape of the grinding tool behind it. The bad thing is that after the stent leg is deployed, it cannot be fixed and it is too loose.
The telescopic bar is the biggest difference between this product and other self-timer bars. The locking method is unique. I feel so good, a little adaptation, and the contraction is rapid, in one go.
Take a look at how it works on a tripod! Is it not tasteless in the end? The most frightening thing is to buy this kind of multifunctional thing. As a result, every function is not good. But this tripod is really good. As long as the floor/desktop is flat, it is very stable and will not fall on touch. Self-portrait behind the convex mirror is still very good to use, grasp the good angle, can also use the rear camera to shoot the United States and the United States self-timer!
The grip of the clip phone is also good, with two stages of retracting, so even a larger phone can clip. But the plastic of the clip and selfie stick looks cheaper and not high enough.
Pitch angle display. 180 ° no problem. With PTZ, you can also make many side angles that traditional selfie sticks can't do.
With the phone clip combination, but also vertical grip the phone. This is very convenient for all live broadcasters. Why is the vertical broadcast called "Glorious Live"?
It was still very stable after being erected.
Since you have a 1/4 screw, you can't clip the phone and you're done, you have to be a big guy!
I'm sorry that there is a direction that can't be changed. Let's be the active cervical spine. Can see that a micro-single is still not a problem, a piece of cake. But if you still feel bad about your camera, don't set it too high. I just use it as an extreme display and don't pull it all out.
Clipped in the right place, micro shots can also be self-timer! In the past, using a micro-shot for self-timer was not long enough, and the face was too big.
As a limit test, I also put the SLR up. Embarrassing such a small clip.
Later, I used a mobile phone to clip micro-orders and found that it could also be used. . . . Ha ha. . . Is it not 1/4 screw?
Comparison of size and traditional selfie stick. 5.5 post shot shot of family affection. It can be seen that due to the relationship between the heads, it cannot flip over and fold, which is 1/3 longer than traditional selfie sticks. It also has a much larger volume and twice the weight. After the phone clip is removed, it is considered appropriate.
experience feelingsAfter some time playing, I was basically satisfied with this selfie stick. The styling is also relatively simple and stylish. If you have a demand for 1/4 screw, the price of 139 is very suitable. If you are not in a hurry, you can wait for a discount.
Some people think that these brackets are too short and not high enough. But I think if you shoot people, it's better to have a lower angle. So this is not a problem at all. Too high and unstable.
Features:
Bluetooth (It is said that the remote controller can shoot 30,000 photos)
1/4 screw
tripod
Back convex mirror
Anodizing feels good
PTZ
Vertical shooting
Disadvantages:
Tripod support is too loose and confidence is not enough. However, it is still stable.
Non-Pressurized Solar Water Heater
Non-pressurized Solar Water Heater is a cost-effective system for residential hot water application. this system is designed according to thermosiphon principle and operating with proportion difference between cold and hot water. The water heated by Vacuum Tubes is held in the stainless steel storage tank where the insulation preserves the heat.
The thermosiphon solar water heater uses the sun to heat the working fluid (mostly water) in the vacuum tubes. The Solar Collector absorbs solar radiation, and converts the sunlight to heat and transfer it to the water. The heated water naturally rises through the solar collector into the water tank where the cooler water at the bottom of the tank is forced out and descends to the bottom of the collector (thermosiphon circulation). The circulation will be interrupted when there is no solar radiation.
Advantages
and benefits
-
Cost effective solar water heating solution
- Long operating life time over 10 years
- Low cost in maintenance and repair requirements.
- Short amortization rate
- Economic customized solar water heating solution
Performance
characteristics
- Higher energy yield and low heat loss due to the high vacuum of the
evacuated tubes and PU insulation harmless to ozonosphere
- High-quality stainless steel in the inner tank to continuously maintain
a good water quality.
- Stainless steel inner and outer tank, highest water tank quality for coastal areas
Solar Panel Heater,Non Pressurized Solar Water Heater,Non Pressure Type Water Heater,Solar Water Heater 300L
Linuo Ritter International Co.,Ltd , https://www.lnrtsolarenergy.com