How to install a thermal deformation Vicat softening point temperature tester? -Huaqiang Electronic Network

Installation of thermal deformation Vicat softening point temperature measuring instrument

1.

Open the box, take out the equipment, and count all parts by packing list.

2.

The main unit should be placed on a flat, sturdy ground, fixed and grounded reliably.

3.

Inject methyl silicone oil into the oil tank and check the oil drain nozzle and other parts for oil leakage.

4.

The added methyl silicone oil is about 9 liters, that is, the oil surface is parallel to the lower plane of the beam in the sample holder.

5.

Place the three sample holders on the tray and check if the load rod moves up and down smoothly.

6.

Connect the connection between the main unit and the temperature control box.

7.

The water inlet of the cooling water pipe is connected with the water pipe by a hose, and the water outlet is connected with the sewer by a rubber hose.

8.

Check that each connection is correct. Turn on the power of the main unit and the motor starts to run.

9 Install the dial gauge on the dial gauge and fix it.

This machine is a non-metallic material testing instrument designed and manufactured according to the latest international standards and national standards. It is mainly used for non-metal such as plastic, hard rubber, nylon, electrical insulating materials, long fiber reinforced composite materials, high strength thermosetting laminates. Determination of the heat distortion temperature of the material and the Vicat softening point temperature. It is easy to operate and precise in control. It is a highly intelligent test instrument widely used in colleges and universities, research institutes and product quality supervision and inspection units. The LED digital tube display shows that the test results are straightforward. It adopts single-chip control, PID phase-modulated output, real-time key storage, query test result, has upper limit temperature setting, and automatically stops heating when the test temperature reaches the upper limit temperature.

Implementation standards: in line with GB/T1633, GB/T8802, GB/T1634, ISO2507, ISO75, ISO306, ASTMD1525, ASTMD648 and other standards.