Tianlong:
1. Use the key to turn off the power.
2. Press the button while
Press the button
And keys.
3. Once the display flashes at 1 second intervals, release the two keys pressed.
(If the display does not flash at intervals of about 1 second in step 3, start from step 1)
Yamaha:
1. Set the lower left corner of the case to (shutdown)
2. Open the front panel
, press and hold, and set the first step to (boot)
The screen displays "ADVANCED SETUP"
3. Rotate the knob selection on the panel
The screen displays "INITIALIZE CANCEL"
4. Press again to select
The screen displays "INITIALIZE ALL"
5. Press the button again
, make it (confirm reset, and shut down, OK)
Sony:
After SONY is turned off, press the power switch for 3 seconds. After the display is displayed, press the Enter key.
Marantz:
Take a screenshot of the manual directly, page 70 of the manual

pioneer:
1. Open the front panel and set it to
(Before this, you need to disconnect the IPOD or
Other USB devices)
2. Turn on the power, the machine is in standby state
3. Press
Front panel
Key while holding
Key on the front shell
(The screen will display "RESTE<NO>")
4. Press
Direction key on the panel <â†
→> to select, then press
(The screen will display "RESET? OK")
5. Press to proceed
Reset confirmation
(The screen will display "OK")
Onkyo:
Turn on the power, while holding down the VCR/DVR, press ON/STANDBY. “clear†will appear on the display, the AV unit enters standby mode and the reset is complete.
Lescon:
Lexicon Standby first and then use the remote control to immediately press mute on the remote control, then the screen has a menu, choose to restore the exit settings, press the right button to confirm
Vision SE is our specialist vision solution offering a wide range of classification services. Through advanced image processing, we realize professional-level visual technology, which is suitable for medical image processing, scientific research and other fields. We focus on performance optimization to make it an industrial-grade solution that is widely used in factory automation and high-demand application scenarios. At the same time, we pay attention to data security and privacy protection, ensuring that the highest standards are met when processing images and data. Vision SE's classified services exceed expectations, providing high-performance and professional-grade vision solutions to various industries.
vision services,vision sensor,vision sense,vision se,vision se review
Ningbo Autrends International Trade Co., Ltd. , https://www.visionsemr.com