The working principle of controlling the smart curtain through the mobile terminal is: for different smart curtains, the operating software is also not the same. It is determined according to the manufacturer's control and development. In general, the manufacturer will upgrade the panel control system and develop the corresponding software, and the user will control it through the corresponding APP application.
1) Command launch. The command launch is that the sensor actively triggers the completion of the intelligent control, and of course, it can also manually indirectly trigger the control command to complete the command launch, such as using a smart phone or a tablet computer to control the smart curtain.
2) Command execution. Command execution means that the corresponding circuit of the electric curtain motor is driven to be turned on or off immediately after receiving the control command to control the opening and closing of the curtain.
Although the mobile terminal control of smart curtains is more mature than smart home control, it still needs to be determined according to the development and control of the manufacturer.
Intelligent curtain node board initialization
In the traditional sense, a gusset plate refers to a steel plate in which a rigid node truss connects together the respective ridges at the node. However, the intelligent louver board is different from it. The gusset board is very important for smart curtains. The initialization of the gusset board should pay attention to the selection, adjustment and determination of the position.
For intelligent blinds, please contact professional personnel. Otherwise, the application of smart blinds will be adversely affected.
Install curtains, motors and gusset plates
The prerequisite for the use of intelligent curtains is the installation of curtains, motors and gussets. For the installation of the curtain, first draw the line position, measure the track size, then install the lifting clips, and connect the motor, then let the track and the motor connected, then fix the module in place, and put the module in a fixed position 220Y power supply, and then pull the corresponding power cord to the same position, and then connect the power cord and curtain machine line, and finally connect the power module, if the indicator light, curtain machine can work, then the installation is successful.
All connections must be performed in the event of a power failure.
Smart Curtain Coordinator Installation, Commissioning and Operation
The installation, commissioning, and operation of the coordinator—generally through the connection of IoT wireless gateways—allows the user to control smart blinds through the use of various mobile smart terminals. The ZW0027 wireless gateway is now commonly used. It is a communication device based on the ZigBee protocol and provides a standard Ethernet interface. It can connect a ZigBee wireless network to a LAN or the Internet to control any products based on the ZigBee protocol, such as smart curtains. .
By using the SVLEC strain relief systems the user can quickly assemble organize and provide strain relief for cables .The systems can be used for organizing cables in machines , switch cabinets , enclosures and dynamic cable carriers .
cable relif plate , strain relief plate , PA relif plate
Kunshan SVL Electric Co.,Ltd , https://www.svlelectric.com