Panel Mount RJ45 Ethernet Extension Cable

Model NO.: NM-CAT-1013
Wire Core Material: Bare Copper Wire
Certification: CE, RoHS
Model: Cat 5e,Networking Cable
Brand: Nanming
Trademark: NanMing
Specification: SGS
Origin: Shenzhen Guangdong
HS Code: 8544421900
Model NO.: NM-CAT-1013
Wire Core Material: Bare Copper Wire
Certification: CE, RoHS
Model: Cat 5e,Networking Cable
Brand: Nanming
Trademark: NanMing
Specification: SGS
Origin: Shenzhen Guangdong
HS Code: 8544421900
Panel Mount RJ45 Ethernet Extension Cable(NM-CAT-1013)

Spcifications:

This handy Ethernet extension cable will make it easy for you to enclose a device that has an Ethernet port. We think this would be most useful when putting a Cubieboard, Beagle Bone, Raspberry Pi, Arduino Ethernet into a box.

The jack half has two mounting 'ears' with M3 screws installed, 1.125" inch / 28.5mm apart. The ears are flexible so the holes don't have to drilled very precisely. Can be used with box walls up to 0.25" wide. The screws can be put on from the back for 'reverse' mounting if the box thickness is a problem. Entire cable is 9" long.

 

Detailed Features:

  • Panel mount Ethernet 8P socket with Ethernet 8P plug at cable end. Straight-through extension
  • 24 AWG wires
  • 11" long / 28 cm
  • Two M3 mounting screws, 1.125" / 28.5mm apart
  • Plastic "boot" at Ethernet end is 20.91mm tall x 38.47mm wide (22.81mm where it is smaller behind the mounting flange) x 28.21mm deep

Panel Mount RJ45 Ethernet Extension Cable
Panel Mount RJ45 Ethernet Extension Cable
Panel Mount RJ45 Ethernet Extension Cable


Transportation:
All available shipping ways could be applied, by courier, air or sea.
Your appointed forwarders or our own forwarders all could be used for shipment.
Full-way tracking the cargos for you before the goods arrive.
 
Globe Market:
Depending on advanced technology and knight service, we establish a good and diligent team and keep nice business relationship with a large amount of worthy clients in global market. We are prepared to provide the best products to clients at competitive price. In addition to control of cost and quality, our stipulated lead-time, variety of designs, capability of product development and flexibility of service bring convenience and value added services to the clients.
 
Contract us:
We highly appreciate your any enquiry by email, fax or instant message.
We will reply your email or fax within 12 hours.
Please fell free to call us at any time if you have any questions.
 
FAQ:
1. Do you provide samples?
Yes, Two samples for free .Dear ,freight fee charged by your side.
 
 
2. What is your minimum order quantity?
The MOQ is 100 pcs , but the quantity for OEM should be 2000 pieces or more.
 
 
3. What about your production capacity?
We can produce 30k boxes or 10,0000 pieces a month.
 
 
4. Where is your company?
Our company and factory all are in Shenzhen.
 
5. Can you make OEM?
Of course.

6. Welcome to visit our website:
www.sznanming.cn


Samples
available
 
 
Detail Packaging
polybag or customized
 
 
Quality Control
Every part tested by inspection machine to make sure that every product works well before shipment
 
     
Service
Best quality and reasonable prices. Prompt delivery and excellent after-sales service
 

Shipment
DHL,UPS,FedEx,TNT,EMS or customers requirements
 
 
Remark
1.high quality and durable
 

2.OEM ODM are welcome
 

3.Logo is available

Panel Mount RJ45 Ethernet Extension Cable(NM-CAT-1013)

Spcifications:

This handy Ethernet extension cable will make it easy for you to enclose a device that has an Ethernet port. We think this would be most useful when putting a Cubieboard, Beagle Bone, Raspberry Pi, Arduino Ethernet into a box.

The jack half has two mounting 'ears' with M3 screws installed, 1.125" inch / 28.5mm apart. The ears are flexible so the holes don't have to drilled very precisely. Can be used with box walls up to 0.25" wide. The screws can be put on from the back for 'reverse' mounting if the box thickness is a problem. Entire cable is 9" long.

 

Detailed Features:

  • Panel mount Ethernet 8P socket with Ethernet 8P plug at cable end. Straight-through extension
  • 24 AWG wires
  • 11" long / 28 cm
  • Two M3 mounting screws, 1.125" / 28.5mm apart
  • Plastic "boot" at Ethernet end is 20.91mm tall x 38.47mm wide (22.81mm where it is smaller behind the mounting flange) x 28.21mm deep

Panel Mount RJ45 Ethernet Extension Cable
Panel Mount RJ45 Ethernet Extension Cable
Panel Mount RJ45 Ethernet Extension Cable


Transportation:
All available shipping ways could be applied, by courier, air or sea.
Your appointed forwarders or our own forwarders all could be used for shipment.
Full-way tracking the cargos for you before the goods arrive.
 
Globe Market:
Depending on advanced technology and knight service, we establish a good and diligent team and keep nice business relationship with a large amount of worthy clients in global market. We are prepared to provide the best products to clients at competitive price. In addition to control of cost and quality, our stipulated lead-time, variety of designs, capability of product development and flexibility of service bring convenience and value added services to the clients.
 
Contract us:
We highly appreciate your any enquiry by email, fax or instant message.
We will reply your email or fax within 12 hours.
Please fell free to call us at any time if you have any questions.
 
FAQ:
1. Do you provide samples?
Yes, Two samples for free .Dear ,freight fee charged by your side.
 
 
2. What is your minimum order quantity?
The MOQ is 100 pcs , but the quantity for OEM should be 2000 pieces or more.
 
 
3. What about your production capacity?
We can produce 30k boxes or 10,0000 pieces a month.
 
 
4. Where is your company?
Our company and factory all are in Shenzhen.
 
5. Can you make OEM?
Of course.

6. Welcome to visit our website:
www.sznanming.cn


Samples
available
 
 
Detail Packaging
polybag or customized
 
 
Quality Control
Every part tested by inspection machine to make sure that every product works well before shipment
 
     
Service
Best quality and reasonable prices. Prompt delivery and excellent after-sales service
 

Shipment
DHL,UPS,FedEx,TNT,EMS or customers requirements
 
 
Remark
1.high quality and durable
 

2.OEM ODM are welcome
 

3.Logo is available

Litz Wire Typical applications are: high frequency inductor, transformer, frequency converter, fuel cell, the horse, communication and IT equipment, ultrasound equipment, sonar equipment, televisions, radios, induction heating, etc.In 1911, New England became the first commercial manufacturer in the United States to produce the Leeds line.Since then, New England has remained the world leader in providing high-performance Leeds line products and solutions to customers around the world.It is also transliterated as the "litz line".

Litz Wire

Litz Wire,Copper Litz Wire,Copper Transformer Litz Wire,High Temperature Litz Wire

YANGZHOU POSITIONING TECH CO., LTD , http://www.yzpstcc.com

Posted on