Recently started a tplink dual-band network adapter, ready to change the home desktop cable into wireless Internet access, but the home router or tp more than one hundred wireless old router, to deal with the family's several mobile phones, two computers feel that the old cattle pull Broken car, a bit sorry 20M fiber network, often high load will compare cards. If you change to wireless Internet access, you may need to wear a wall, because I usually do not work at home when my neighbors are retired during the day, so I’m a partner with a fiber optic network. Neighbors need to go through the wall. My own router is in the bedroom, so the living room also needs a wall. Selected to choose to go to the last to start with an ASUS RT-AC1200GU 1200M Gigabit dual-band wireless router, a treasure to buy more than 400 dollars, the price at heart price can be accepted, Also read the article on the Internet this article does not seem to split Solution, so after I received it, I gave everyone a simple experience to disassemble. Support for 1 year replacement, this can be. 4 with 5dBlx4 antenna, I guess it should be 2 2.4G, 2 5G, this router is very confident in radiation safety, ah, propaganda even wrote that the proposed use of elderly and pregnant women in the environment, I chatted ! Gigabit network port does not know how the speed performance, try later.
The side is the packaging accessories and product parameters:
The RT-AC1200GU is small, relatively light, with two antennas on the back and sides, front indicator,
Behind the interface, USB interface is also on the back, 1 WAN, 4 Gigabit LAN,
Bottom support wall, hanging hole,
Dismantling to see, there are some mistakes to welcome everyone to correct me, the internal looks relatively regular, there is no heat sink, it seems that MediaTek MT7621AT+MT7612EN+MT7603EN+Winband program,
The main chip MT6201AT MediaTek, it really is the MediaTek program, this chip seems to have used a lot of routers, Dunmian seems a word of mouth seems to be,
Winband Winbond memory, see number should be Winbond DDR3 1G memory chip, large capacity,
MT7612EN chip supports 2×2 5GHz signal amplification transmission
MT7603EN should be the chip responsible for 2.4G frequency band,
The back-end interface ASUS has always been good, the operation is relatively simple, there are many options, and the router updates a bit of firmware, which seems to be a lot more stable than the default firmware.
USB function is also more abundant, support offline download, network printing,
Found that the router has a regional option, have tried it, it seems that Australia time zone signal through the wall strongest, two or three walls are stable signal transmission, much better than China,
This is a test of the 2.4G and 5G signals on the two walls of the computer. The neighbors went to watch him and there was no problem with the reception. The actual transmission was stable.
With wired LAN sharing, the transmission speed under Gigabit is more than 100MB/sec fluctuation, the transmission process is very stable, and it conforms to Gigabit performance.
It seems that this router can be installed APP, and then have time to go install the study function.
advantage:
One year renews the backstage interface The simple operation function is more stable through the wall, especially after changing into the Australia time zone through the wall transmission to stabilize a lot of local area network transmissions to reach the Gigabit performance China's signal radiation is relatively safe
insufficient:
USB interface is not USB3.0
After the upgrade, the firmware is better than the default internal circuit with no shield and heat sink
1000 Portable Power Station,1000 Portable Power Station Price, 1000 Portable Power Station product
Jiangsu Zhitai New Energy Technology Co.,Ltd , https://www.zttall.com