Summary:
This paper describes the working principle of two kinds of amplifying circuits in the design of the current amplifying module of the signal generating device, and compares their performances. It is concluded that the output signal of the latter circuit is better than that in the case of small current output. The conclusion of the former circuit.
The signal generating device is an integral part of the "multi-function microcomputer protection and substation integrated automation experimental training device" developed by Hunan University. Its main function is to simulate various conventional and fault conditions in the power system and to generate current and voltage signals. In order to simulate the actual situation of the secondary field, the current output signal of the signal generating device must be adjustable from 0 to 30 A (peak), and the output error must be ≤ 0.11. To this end, the designed current amplifying module must meet the requirements of small signal input, high power precision output, and can withstand high current and high voltage. Therefore, in design, in addition to considering the stability of the circuit module, if the external load changes within a certain range, it must also ensure the consistency of the output waveform and the input signal waveform.
Current amplifier circuit design 1
See PDF document for details.
[More items]
Ethernet Slip Ring is a device that allows Ethernet signals to be transmitted through a rotating assembly. This device is typically used in applications where it is not possible or practical to run Ethernet cables, such as in an application where the cables would have to travel through a hazardous area. It converts the regular Ethernet signals into rotary signals, which are then transmitted through the rotating assembly.
There is a growing trend in the industry for Ethernet slip rings. Ethernet slip rings are currently being used to interconnect computer networks. A slip ring is a transmission device that uses a counter-rotating encircling belt to transfer power and data between two or more devices.
Senripgrid Conductive Slip Ring has the following characteristics Direct unplugging of the RJ45 connector Upon reaching eight simultaneous ports, follow the standard cable connection method Work with either copper or gas-liquor joints Transmission to the external network (10M, 100M, 1Km Base T).
Ethernet Slip Ring,Generator Collector Rings,Through Bore Rotary Union,Rotary Pressure Joint
Dongguan Oubaibo Technology Co., Ltd. , https://www.sliprobo.com