Branch DJ6 Series EDM Leak Detector (Simplified Handling of Common Problems)
one. Do not boot: 1. The battery is charged, please check the charge
2. Is the fuse open or closed?
3. Press key in place or key problem
4. Other host failures, etc.
two. Can not start the fire: 1. Check whether the probe line is open
2. Probe has high voltage output and working noise
3. Some model probe switches have poor contact
4. Low battery voltage, low battery
three. Smaller sparks at startup: low battery voltage or probe aging
four. Automatic shutdown after ignition: Host device failure
Long alarm after power on: ↑
Bounce of the displayed value: ↑
Fives. Even when the line is turned on, the alarm is mainly checked: the grounding problem is detected, and the grounding line is broken.
Whether the grounding clip is rusty or not connected properly
Whether the workpiece is directly or indirectly grounded
six. Charger does not charge: Check whether the charger's 1.3 pin has a voltage of 15V.
Host failure
Excessive damage to battery consumption
Seven. Charging yellow light is not extinguished: charging circuit module device, comparison voltage is not allowed (does not affect the use)
The battery has a loss of loss or aging or has a virtual power
(Try to charge more than 10 hours to activate)
Eight. Charging yellow light does not shine: The battery or is already full about 13V voltage
Incorrect charging circuit indication (does not affect use)
Note: It is recommended that each charge is not less than 10 hours. Even after the yellow light is extinguished, it can be charged. The yellow light is off just to indicate that the battery is not undercharged. It can be used for a while.
nine. The instrument is always on red: The battery is undercharged and the battery is not charged
Charger cannot be charged
Severe aging of battery
Other host line failure
For more tips and solutions, please consult http:// 0537-2884797 public number KEDIANYIQI
Zero Phase Current Transformer
PCB Mount Type current sensing transformer
A Current Transformer (CT) is a type of transformer that is used to measure alternating current (AC). It produces a current in its secondary which is proportional to the current in its primary.
Current transformers, along with voltage or potential transformers, are instrument transformers. Instrument transformers scale the large values of voltage or current to small, standardized values that are easy to handle for measuring instruments and protective relays. The instrument transformers isolate measurement or protection circuits from the high voltage of the primary system. A current transformer provides a secondary current that is accurately proportional to the current flowing in its primary. The current transformer presents a negligible load to the primary circuit.
We attend Electrical exhibition In India, Germany and Brizil, South Korea...
All of our material meet the RoHs, UL , SGS, CE certification
FAQ
1-MOQ?
We will work hard to fit your MOQ .Small purchase quantity is ok.
2-Payment term?
T/T, Western Union, Paypal, Credit Card
3-Delivery port?
Shenzhen, Guangzhou, Zhongshan, Hongkong.
4-Shipping date?
About 7 days when we check the payment.
5-Do you produce the core and bobbin by yourself .
Yes.we have 2 head company,1 subsidiary company.one is bobbin factory,one is core factory,last one is transformer factory.
6-Where is your factory?
In ShaanxI
Zero Phase Current Transformer,Dc Immune Current Transformer,Protection Current Transformer,Ring Type Current Transformer
Shaanxi Magason-tech Electronics Co.,Ltd , https://www.magason-tech.com