It is suitable for the connection of control, monitoring circuit and protection circuit, can withstand external force and considerable tension, with good function of anti-interference.

Cable Product Structure:

Conductor: Single or multiple strands of bare copper wire stranded, in line with GB/T 3956-2008 and IEC 60,228:2004 class 1th or class 2nd conductors

Insulation: PVC/A Type PVC

Core wire: Wire twisted synthetic cable, core line color in accordance with GB/T 5023.1 and jb/t 8734.1 priority chromatography selection

Color or coded core, 3-core with yellow-green color line (optional)

Lining: The use of extruded or wrapped non-hygroscopic material, the inner liner of the extruded package shall not be glued to the insulating wire core, the inner liner of the package may be double or multilayer overlapping wrapping

Armored: Galvanized steel wire armored, in line with GB/T 2952.1-1989 requirements

Sheath: Pvc/st1 polyvinyl chloride (flame retardant PVC or low smoke halogen free sheath optional)

Sheath color: Black or grey, can be customized according to customer needs of various colors

Cable characteristics:

The long-term operating temperature of the cable should not exceed 70 ºC

Can be directly laid in the inclined shaft or shaft, withstand the large diagonal pull

Flame retardant: Through GB/t 18380-2008 non-ignition test

Cable Technical parameters:

Operating voltage: 450/750v

Test voltage: Insulation thickness ≤0.6mm 2000V, insulation thickness >0.6mm 2500V; finished cable 3000V voltage test Insulation Resistance: ≥20 MΩ.

Km (20 ºC)

Minimum bending radius: Flexible cable with no armor or shielded layer 6 X D (cable od)

Armoured or copper shielded structural cable X D (cable od) Operating Temperature: Fixed Installation-10 ~ +70ºC

Electric Wire Package

Hubei Lisheng Power Cable Co., Ltd. (abbreviation: Lisheng Power Cable) was founded in year 2016, with a total investment of RMB 800 million, or USD 120 million, half of the investment has been completed already.
With a standardized workshop of 46,000.00 square meters, Lisheng Power Cable is mainly engaged in series of high and low voltage power cables of 35KV or less, widely used in many industries, for example, electric power, transportation, energy, engineering construction and so on.
Specific products and service of China Lisheng Power Cable: R&D, design, manufacture, marketing and service of cross-linked, refractory, flame-retardant, common all-plastic power cables, control cables, coaxial cables, pre-branch cables, indoor and outdoor telephone lines, special cables, etc.

Lisheng Power Cable is the key industrial project of the Xiangyang Municipal Government in year 2017. It is the largest cable production project in Northwest Hubei province, and the first local private cable project in Xiangyang City, certified by ISO9001 quality management system, ISO14001 environmental management system, OHSAS18001 occupational health and safety management system, products characterized of "high and low temperature resistance, corrosion resistance, distortion resistance, weather resistance, impact resistance, small cable cross section, strong electrical conductivity and high safety factor etc, total nine major characteristic.
Lisheng Power Cable has obtained national industrial product production license, national compulsory product certification (3C certification), fire-retardant and fire-resistant grade identification authorization certificate etc.
The product technology and performance is in line with leading standard in the related industry in China, products and service warmly welcomed by customers and friends. Cooperate with Lisheng Power Cable, you will get more!


 

Customer Visit
We have a professional sales team with each of them has engaged in this job for 3-10 years,
so that we can provide the comprehensive and professional technology for you. With the perfect quality and after sales service,till now we have exported to more than 80 countries, welcome to visit us and establish win-win business relationship!

FAQ:

I didn't find the cable which I need in this page?
If you didn't find the species of cables you need, please contact us directly, we will reply you quickly.

Are you a trading company or manufacturer?
We are professional manufacturer in Henan, China.

What is the MOQ?
Mostly we sell from stock for normal items, you can buy any quantity unless it is customed-made.

Can you offer me a free sample?
Yes, after price confirmation, you can require for samples to check our quality. Sample is free but the freight charge should be paid.

How long to get the sample?
After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~5 days.

How is your package?
Normally packed with coils and cartons, and wooden/steel wooden drums, other ways can be done according you.

How is the payment?
T/T, L/C is accepted.

What is the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. The best record we keep is delivering 10 kilometers cable within a week. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the products at your country.

Welcome your inquiry! Any question please feel free to contact me.

Factory Add: No. 116 Tai Zi Wan Road, hi tech Zone, Xiangyang, Hubei, China
Tel: 86-0710-3969999

It is suitable for the connection of control, monitoring circuit and protection circuit, can withstand external force and considerable tension, with good function of anti-interference.

Cable Product Structure:

Conductor: Single or multiple strands of bare copper wire stranded, in line with GB/T 3956-2008 and IEC 60,228:2004 class 1th or class 2nd conductors

Insulation: PVC/A Type PVC

Core wire: Wire twisted synthetic cable, core line color in accordance with GB/T 5023.1 and jb/t 8734.1 priority chromatography selection

Color or coded core, 3-core with yellow-green color line (optional)

Lining: The use of extruded or wrapped non-hygroscopic material, the inner liner of the extruded package shall not be glued to the insulating wire core, the inner liner of the package may be double or multilayer overlapping wrapping

Armored: Galvanized steel wire armored, in line with GB/T 2952.1-1989 requirements

Sheath: Pvc/st1 polyvinyl chloride (flame retardant PVC or low smoke halogen free sheath optional)

Sheath color: Black or grey, can be customized according to customer needs of various colors

Cable characteristics:

The long-term operating temperature of the cable should not exceed 70 ºC

Can be directly laid in the inclined shaft or shaft, withstand the large diagonal pull

Flame retardant: Through GB/t 18380-2008 non-ignition test

Cable Technical parameters:

Operating voltage: 450/750v

Test voltage: Insulation thickness ≤0.6mm 2000V, insulation thickness >0.6mm 2500V; finished cable 3000V voltage test Insulation Resistance: ≥20 MΩ.

Km (20 ºC)

Minimum bending radius: Flexible cable with no armor or shielded layer 6 X D (cable od)

Armoured or copper shielded structural cable X D (cable od) Operating Temperature: Fixed Installation-10 ~ +70ºC

Electric Wire Package

Hubei Lisheng Power Cable Co., Ltd. (abbreviation: Lisheng Power Cable) was founded in year 2016, with a total investment of RMB 800 million, or USD 120 million, half of the investment has been completed already.
With a standardized workshop of 46,000.00 square meters, Lisheng Power Cable is mainly engaged in series of high and low voltage power cables of 35KV or less, widely used in many industries, for example, electric power, transportation, energy, engineering construction and so on.
Specific products and service of China Lisheng Power Cable: R&D, design, manufacture, marketing and service of cross-linked, refractory, flame-retardant, common all-plastic power cables, control cables, coaxial cables, pre-branch cables, indoor and outdoor telephone lines, special cables, etc.

Lisheng Power Cable is the key industrial project of the Xiangyang Municipal Government in year 2017. It is the largest cable production project in Northwest Hubei province, and the first local private cable project in Xiangyang City, certified by ISO9001 quality management system, ISO14001 environmental management system, OHSAS18001 occupational health and safety management system, products characterized of "high and low temperature resistance, corrosion resistance, distortion resistance, weather resistance, impact resistance, small cable cross section, strong electrical conductivity and high safety factor etc, total nine major characteristic.
Lisheng Power Cable has obtained national industrial product production license, national compulsory product certification (3C certification), fire-retardant and fire-resistant grade identification authorization certificate etc.
The product technology and performance is in line with leading standard in the related industry in China, products and service warmly welcomed by customers and friends. Cooperate with Lisheng Power Cable, you will get more!


 

Customer Visit
We have a professional sales team with each of them has engaged in this job for 3-10 years,
so that we can provide the comprehensive and professional technology for you. With the perfect quality and after sales service,till now we have exported to more than 80 countries, welcome to visit us and establish win-win business relationship!

FAQ:

I didn't find the cable which I need in this page?
If you didn't find the species of cables you need, please contact us directly, we will reply you quickly.

Are you a trading company or manufacturer?
We are professional manufacturer in Henan, China.

What is the MOQ?
Mostly we sell from stock for normal items, you can buy any quantity unless it is customed-made.

Can you offer me a free sample?
Yes, after price confirmation, you can require for samples to check our quality. Sample is free but the freight charge should be paid.

How long to get the sample?
After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~5 days.

How is your package?
Normally packed with coils and cartons, and wooden/steel wooden drums, other ways can be done according you.

How is the payment?
T/T, L/C is accepted.

What is the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. The best record we keep is delivering 10 kilometers cable within a week. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the products at your country.

Welcome your inquiry! Any question please feel free to contact me.

Factory Add: No. 116 Tai Zi Wan Road, hi tech Zone, Xiangyang, Hubei, China
Tel: 86-0710-3969999

Networking Keystone Jacks

Networking Keystone Jacks.China Cat5e Coupler Jack,Keystone Jack Short Body manufacturer, choose the high quality Cat5e Jack Short,Keystone Jack Unshield, etc, included keystone jacks for CAT6A, CAT6, CAT5E, and CAT3

Keystone jacks are snap in modules used to mount low voltage electrical connectors into a keystone wall plate, patch panel, face plate or surface mount box.

Our Keystone Jacks are available in 10 different colors for easy color-coded installations.

RJ45 port editing

1. Origin:



2. The name RJ stands for the registered jack and is the USOC (universal service ordering codes) code of bell system. USOC is a series of registered sockets and their wiring mode, which are developed by bell system to connect the user's equipment to the public network. FCC regulations control the application of this purpose. The FCC (Federal Communications Commission) issued a document on behalf of the U.S. government to specify RJ11.



3. RJ11 is the common name of the connector developed by Western Electric Co. Its shape is defined as a 6-pin connecting device. Originally called wexw, where x means "active", contact or needle. For example, we6w has all six contacts, numbered from 1 to 6. The we4w interface only uses four pins, the outermost two contacts (1 and 6) are not used, and we2w only uses the middle two pins. For RJ11, the information source is contradictory. It can be a 2 or 4-core 6-pin connector. What's more confusing is that RJ11 is not only used to represent the 6-pin connector, it also refers to the 4-pin version.



4. RJ45 and RJ11: different standards, different sizes



5. Due to the different sizes of the two (RJ11 is 4 or 6-pin, RJ45 is an 8-pin connection device), it is obvious that the RJ45 plug cannot be inserted into the RJ11 socket. However, it is physically feasible (RJ11 plug is smaller than RJ45 jack), which makes people think that they should or can work together. It's not. It is strongly recommended not to use RJ11 plug for RJ45 socket.



⒍ because RJ11 is not internationally standardized, its size, insertion force, insertion angle, etc. are not in accordance with the international standard connector design requirements, so interoperability cannot be guaranteed. They even cause damage to both. Since the RJ11 plug is smaller than the RJ45 socket, the plastic parts on both sides of the plug will damage the metal pin of the inserted socket.



RJ - 45 port is our most common port, it is our common twisted pair Ethernet port



Because twisted pair is mainly used as transmission medium in Fast Ethernet, RJ-45 port can be divided into 10Base-T network RJ-45 port and 100base TX network RJ-45 port.



Among them, the RJ-45 port of 10Base-T network is usually identified as "eth" in the router, while the RJ-45 port of 100base TX network is usually marked as "10 / 100btx". This is mainly due to the fact that most products of Fast Ethernet router still adopt 10 / 100Mbps bandwidth adaptive.



The left figure shows the RJ-45 port of 10Base-T network, while the right figure shows the RJ-45 port of 10 / 100base-tx network. In fact, the two RJ-45 ports are exactly the same in terms of the port itself, but the corresponding network circuit structure in the ports is different, so they can not be connected casually.



Definition of RJ45 interface pin signal



Ethernet 10 / 100Base-T interface:



1 TX + tranceive data +



2 TX - tranceive data -



3 RX + receive data +



4 N / C not connected



5 N / C not connected



6 RX - receive data



7 n / C not connected



8 N / C not connected



Ethernet 100base-t4 interface:



1 TX_ D1 + tranceive data +



2 TX_ D1 - tranceive data



3 RX_ D2 + receive data +



4 BI_ D3 + bi directional data +



5 BI_ D3 bi directional data



6 RX_ D2 - receive data



7 BI_ D4 + bi directional data +



8 BI_ D4 bi directional data



Note: RJ45 interface adopts differential transmission mode, TX + and TX - are a pair of twisted pair, which can reduce interference when twisted together.

Cat5e Coupler Jack,Keystone Jack Short Body,Cat5e Jack Short,Keystone Jack Unshield

ShenZhen Antenk Electronics Co,Ltd , https://www.antenkwire.com