At the European Microwave Week 2010, Rohde & Schwarz proved its leadership in the microwave field with the new 500 GHz test and measurement solution. Rohde & Schwarz has exhibited a number of highlights, including the R&S FSVR real-time spectrum analyzer with frequency up to 30 GHz, and the multiplier option R&S SMZ for microwave signal source R&S SMF100A extends the source output frequency to 110 GHz, based on high-end networks Analyzer R&S ZVA's network analysis solution up to 500 GHz. In addition, R&S also exhibited the latest two oscilloscopes with bandwidths from 500 MHz to 2 GHz.
R&S FSVR, the world's first real-time spectrum analyzer with a frequency of 30 GHzRohde & Schwarz's new real-time spectrum analyzer, the R&S FSVR, is the first to combine a full-featured signal, spectrum analyzer and real-time spectrum analyzer. In real-time mode, the R&S FSVR can detect all signals, from very occasional single events to very short-lived signals. No blind time measurements have benefited R&D staff of RF transmission components such as LTE, WiMAX, WLAN, Bluetooth or RFID, and general-purpose RF applications such as radar or frequency hopping transmission systems, and the R&S FSVR has a faster test speed than the market. Similar products are 5 times faster.
New R&S SMZ frequency multiplier family provides convenient measurement capability in the 50 GHz to 110 GHz microwave bandAt the European Microwave Week, Rohde & Schwarz first introduced the new family of frequency multipliers, including the R&S SMZ75 (50 GHz to 75 GHz), the R&S SMZ90 (60 GHz to 90 GHz) and the R&S SMZ110 ( 75 GHz to 110 GHz). The R&S SMZ is the first frequency multiplier on the market to offer an internal manual or electronic level controller option. The frequency multiplier can be controlled via the USB interface of the microwave signal source R&S SMF100A. The source and frequency multiplier can be regarded as a Instrument. Through this interface, the R&S SMF100A receives all required data, such as configuration, multiplication factor, or automatically corrects the required pre-calibrated frequency response value. In this way, the required frequency and level values ​​can be obtained at the output of the multiplier by directly setting the interface of the SMF100A. This eliminates error-prone and time-consuming level measurements that have often required level detection or power probes to test levels in previous R&D and production tests.
New frequency converter extends Rohde & Schwarz network analyzers to the 500 GHz bandThe new R&S ZVA-Z500 makes Rohde & Schwarz the only supplier to offer 500 GHz network analyzers and corresponding frequency converters. The drive is easy to connect to Rohde & Schwarz's high-end vector network R&S ZVA without any external hardware. The combination of the two can be operated and calibrated like a single web host. The new R&S ZVA-Z500 drive achieves a dynamic range of 65 dB typical for millimeter-wave measurements. Tests such as amplifiers, mixers, filters, couplers or on-chip components can be implemented on this drive.
High speed, precise and easy to use: new high performance oscilloscopeFor the user, the speed at which the oscilloscope is used to detect errors and the accuracy of the displayed waveform are critical. This is why Rohde & Schwarz designed and built the new R&S RTO oscilloscope family for speed and signal fidelity. You can analyze 1 million waveforms per second, and you can even display the rarest errors right away with the oscilloscope. The first digital trigger system implemented on an oscilloscope guarantees minimal trigger jitter. The intelligent user interface provides a perfect visual interface even for complex measurements. The new oscilloscope will be available in two- and four-channel versions with bandwidths of 1 GHz and 2 GHz with a maximum sample rate of 10 Gs/s.
Rohde & Schwarz's universal oscilloscopes offer superior performance at an attractive priceThe R&S RTM Universal Oscilloscope from Rohde & Schwarz is the device of choice for everyday measurement tasks because of its superior features, wide range of functions and compact design. 500 MHz bandwidth, 5 Gs/s sample rate, and 8M sampled memory depth make them ideal for low clock rate analog and digital circuit testing and debugging. The extremely low intrinsic noise and full bandwidth test capability at the highest sensitivity guarantees high signal fidelity and reliable test results. Thanks to its color-coded control unit, flat menu structure and high-brightness 8.4-inch XGA TFT color display, the compact and lightweight R&S RTM oscilloscope offers maximum ease of operation.
1.The XFX RX 580 series graphics card feature the latest Polaris architecture which includes the 4th gen GCN graphics cores, a brand new display engine, new multimedia cores, all on the revolutionary next finfet 14 process technology for enhanced performance and efficiency
2.Equipped with XFX double dissipation cooling technology for optimal cooling and performance. Minimum power requirement is 500 watts. Memory clock true: 8.0GHz, boost OC+: 8.1GHz
3.Multiple factory GPU overclocked settings - 1366 MHz true clock and 1386 MHz OC+
gpu mining,gpu for mining,gpu mining nvidia,gpu mining rig for sale,gpu mining for sale
Easy Electronic Technology Co.,Ltd , https://www.yxpcelectronicgroups.com